Pratley Pratlok Grade 0-6 
cat.no. 92050 |
-
Low Strength (Purple lid)
-
Typically for screws in the 0-6mm size range
-
Prevents loosening due to vibration
-
Seals the thread and retards corrosion
|
|
Pratley Pratlok Grade 6-10

cat.no. 92051
|
-
Medium Strength (Blue lid)
-
Typically for M6-M10 nuts and bolts
-
Allows disassembly using standard tools
-
Use on nuts and bolts
|
|
Pratley Pratlok Grade 10-20

cat.no. 92052 |
-
High Strength (White lid)
-
Typically for M10-M20 studs and bolts
-
Disassembly difficult without heating
-
Use on studs, bolts and threaded pipe fittings
|
|
Pratley Pratlok Grade 20+

cat.no. 92053 |
|
|
Pratley Pratlok Grade PEN

cat.no. 92054 |
-
Medium Strength (Yellow lid)
-
Ultra low viscosity thread locker for "wicking into pre-assembled fasteners, press fits and knurls
-
Also suitable for sealing micro porosity in welds and castings
|
|
Pratley Pratlok Grade HYD
cat.no. 92056 |
-
Medium Strength (Brown lid)
-
Suitable for fine threads on hydraulic and pneumatic connections
-
Replaces thread sealing tapes and pastes
-
Allows for disassembly with standard tools
-
Grade HYD is not recommended for use in pure oxygen, chlorine and strong oxidizing materials
|
|
Pratley Pratlok Grade BRG
cat.no. 92055 |
-
Medium/High Strength (Green lid)
-
Low viscosity retaining grade for retaining bearings onto shafts, into housings or for bushes and other cylindrical close tolerance assemblies
-
Use this grade to replace press fits with slip fits
|
|
Pratley Pratlok Grade H-Temp
cat.no. 92057 |
-
High Strength (Orange lid)
-
High temperature thread locker
-
Typically for M10-M20 studs and bolts
-
Disassembly difficult without extreme heat
-
Suitable for temperatures up to 230 degrees Celsius
|
|